Products





Home > Shop by Manufacturer > Circuit Medic
Sort By:
Page of 2
Circuit Medic 310-2100 Wire Dots
Circuit Medic 310-2100 Wire Dots
Our Price: $39.95

  • Wire Dots are a wire tacking system consisting of pre-cut shapes of a thin, flexible polymer film membrane coated on one side with a high performance, electronics grade permanent pressure sensitive adhesive.
  • The result is a highly conformable, high strength bond. The adhesive release liner is an environmentally stable poly-coated kraft liner.
  • As with any wire tacking material, in order to achieve maximum bond strength and reliability, application surface must be clean, dry and free of flux, skin oils and other contaminants. Clean with isopropyl alcohol or equivalent if necessary.
  • Firm application pressure develops better adhesive contact and thus improves bond strength. Avoid placing Wire Dots or any other wire tacking material directly over exposed copper or plated surfaces.
  • Wire Dots will perform best when applied at temperatures between 60F (15C) and 100F (38C). Do not apply below 50F (10C).
Circuit Medic 201-4150 Soldering Skills Practice Kit
Circuit Medic 201-4150 Soldering Skills Practice Kit
Our Price: $49.00

  • Are your new soldering and rework operators skilled enough to work on your valuable products? Have they practiced enough to go for certification? The best way to find out is to order our Soldering Skills Practice Kit that lets them work on actual projects until they develop the expertise they need. We provide the tools and practice board and you decide when they're ready.
Circuit Medic115-1322 Epoxy Kit
Circuit Medic115-1322 Epoxy Kit
Our Price: $99.00

  • The Epoxy Kit kit contains 10 packages of clear, low viscosity, superior strength epoxy, precisely measured out into two-compartment plastic packages. This epoxy is easy to use and there's no measuring.
  • Once cured, this epoxy makes an effective electrical insulator with good high temperature, mechanical and impact resistance properties. The epoxy can be used to bond replacement conductors, repair burns and circuit board surface defects, and many other high strength, high temperature applications.
  • You can tint the epoxy using Color Agents. Color agents are designed to mix with the epoxy to match solder mask colors commonly found on circuit boards. See below.
Circuit Medic 201-4350 Repair Skills Practice Kit
Circuit Medic 201-4350 Repair Skills Practice Kit
Our Price: $139.00

  • The Repair Skills Practice Kit will help operators brush up on their circuit board repair skills, and give them a advantage toward becoming IPC certified. Using our Repair Skills Practice Kit and the tools and materials it contains, you can sharpen your skills until you're ready for certification.
  • Includes a circuit board with a variety of plated holes, surface mount pads, replacement circuit tracks, eyelets, epoxies and more.
  • These kits do not include soldering irons and bonding irons for bonding the replacement pads and lands.
Circuit Medic 201-3110 Base Board Repair Kit
Circuit Medic 201-3110 Base Board Repair Kit
Our Price: $199.00

  • Most types of damage to base board material can be repaired with this versatile repair kit. The kit includes epoxies, color agents, and alcohol swabs.
Circuit Medic 201-3140 Plated Hole Repair Kit
Circuit Medic 201-3140 Plated Hole Repair Kit
Our Price: $229.00

  • This kit includes all the tools and materials you need to repair damaged plated through holes in circuit boards.
  • The kit includes a variety of eyelet, carbide ball mills for drilling, and setting tools to form the eyelets conforming to IPC guidelines.
  • Eyelets are made of pure copper or brass electroplated with tin.
Circuit Medic 201-1600 Aerospace Repair Kit
Circuit Medic 201-1600 Aerospace Repair Kit
Our Price: $279.00

  • This kit includes the tools and materials needed to reliably replace damaged lands, surface mount and BGA pads. The unique Circuit Frames used to replace these conductor patterns are made from rolled, annealed copper electroplated with tin. These Circuit Frame do not have an adhesive backing and are bonded to the circuit board surface using liquid epoxy supplied with the kit. You simply select the appropriate size pad or land, trim it from the Circuit Frame and bond it to the circuit board surface with epoxy.
  • This kit that is specifically designed for Aerospace applications where out-gassing may be an issue. All the tools and materials are packaged in a rugged ESD safe carrying case.
Circuit Medic 201-3130 Circuit Track Kit
Circuit Medic 201-3130 Circuit Track Kit
Our Price: $279.00

  • It's now easier than ever to repair damaged circuits. Circuit Tracks are rectangular shaped conductors made of 99.9% pure CDA 11000 copper.
  • These rectangular ribbons closely conform to the original conductor dimensions. The replacement Circuit Track is bonded in place using prepackaged epoxy included in the kit. This kit is a great time and labor-saver and an easy solution to repairing missing or damaged circuits.
Circuit Medic 201-1400 Land/Pad Repair Kit
Circuit Medic 201-1400 Land/Pad Repair Kit
Our Price: $379.00

  • This kit includes the tools and materials needed to reliably replace damaged lands, surface mount and BGA pads. The unique Circuit Frames used to replace these conductor patterns are made from rolled, annealed copper electroplated with tin. Each Circuit Frame has a dry film adhesive backing. You simply select the appropriate size pad or land, trim it from the Circuit Frame and bond it to the circuit board surface. Included with the kit are a bonding iron and tips to match the various sizes of the lands and pads.
  • A multifunctional epoxy is included for over coating the lap solder joint formed between the replacement pad and connecting circuitry.
  • This kit that is specifically designed to make the repair process as simple and reliable as possible. All the tools and materials are packaged in a rugged ESD safe carrying case.
Circuit Medic 201-1120 Gold Contact Repair Kit
Circuit Medic 201-1120 Gold Contact Repair Kit
Our Price: $459.00

  • Repairing gold edge contacts on circuit boards is delicate work, but this kit helps make the process easier and more reliable. Simply select the correct size and shape of gold plated contact from the Circuit Frames included in the kit and bond it in place. These unique replacement circuits have a dry film, adhesive backing that is activated and cured with heat and pressure. This IPC recommended repair method restores your boards to their original level of performance and reliability.