Products





Home > Torque Tools & Accessories
Featured:
ASG Kolver USA
Mountz Nasco Industries, Inc.
Snap-On
Sort By:
Page of 3
Mountz 020299 Torque Screwdriver
Mountz 020299 Torque Screwdriver

Mountz Manual Torque Screwdriver; Minor Green F/H, 3ozf.in-12lbf.in.
Mountz 020301 Torque Screwdriver
Mountz 020301 Torque Screwdriver

Mountz Manual Torque Screwdriver; Minor Gold F/H, 3ozf.in-12lbf.in.
Mountz 120714 Hex & Ball Point Insert Bits
Mountz 120714 Hex & Ball Point Insert Bits

Ballpoint Hex Insert Bits, 9/64" x 1", 5/Pkg
Aimco AE-2015 Lever Start Torque Driver 2-15 in-lbs
Aimco AE-2015 Lever Start Torque Driver 2-15 in-lbs

Torque Driver, 1/4" Hex Drv, Lever Srt, 2-15in-lb
  • Plugs directly into 110V outlet
  • Recommended for consistent, high speed, low torque assembly and disassembly
  • One of the best power-to-weight ratios in the industry
  • One of the industry's best power-to-weight ratios
  • LED light alerts user when brush change is recommended
  • Switch in brush cap shuts off power during replacement
  • External torque collar for easy torque adjustment
  • 1/4" hex quick change chuck for easy bit changes
KOL-RAF-32NS/FR Kolver Inline Electric Screwdriver
Kolver RAF-32NS/FR Inline Electric Screwdriver

  • The RAF32NS/FR is our most popular RAF series screwdriver due to its wide torque range and ergonomic ESD safe in-line body style.
  • This tool is supplied in an ergonomic ESD safe in-line body style.
  • RAF32 Series screwdrivers are designed to meet higher torque applications than the RAF12 family of tools.
  • The advanced ergonomic body design reduces Carpal Tunnel Syndrome.
  • They are lightweight, compact, powerful, and come standard with ESD-safe housing certified to SP method 2472 (Ericsson approved).
  • The RAF series wide torque range and tight torque accuracy, combined with the adjustable RPMs and slow-start options, make it a versatile tool ideal for multiple applications.
  • The torque is set externally: an adjusting nut controls output torque by changing the clutch spring compression. A reference scale will indicate the torque setting.
  • The low voltage 30 VDC rare earth motor combines high performance and long life. Replacing the carbon brushes once a year is all you need for maintenance.
  • The motor works in combination with a control unit. The electronic control circuit cuts the power supply to the motor, in response to the clutch action, as soon as the pre-set torque has been reached.
  • A Controller is required for this tool to operate (purchased separately). The EDU1FR is our most popular controller, because of the RMP control it provides. The EDU1FR/SG offers the same functionality with the addition of an input for remote start and outputs for lever start (motor on) and clutch fired (motor stop). The EDU1CL/FR is the same shape and size but offers no RPM control (this is our lowest cost model). The EDU1FR/PLC offers screw counting and has IO available to control secondary operations.
  • NOTE: The heavy-duty cables and connectors, developed for robotic applications, are made of antistatic dissipative material for a safe use in ESD environment.
KOL-EDU-1FR Kolver Control Unit for FAB and RAF
Kolver EDU-1FR Control Unit for FAB and RAF Series Electric Torque Screwdrivers, Slow Start & RPM Adjustment

  • The EDU1FR is our most popular control unit for FAB & RAF Screwdrivers, and also can be used with the KBL screwdrivers.
  • These control units feature maintenance free state-of-the-art electronics with no wearing components and a circuit design suitable for lever start and push-to-start drivers as well as protection against current overload up to 10A.
  • This design results in very low current to the drivers start switch and clutch switch to extend the life of the screwdriver indefinitely.
  • Options: A double output connector (DOCK01) is also available for operators using two screwdrivers in the same work area. One Screwdriver is powered at a time making this option perfect when two torque setting are required on the same job.
KOL-KBL-04 Kolver Brushless CA Screwdriver
Kolver KBL-04 Brushless CA Screwdriver

  • The Brushless CA screwdrivers are designed for automated and fixtured applications.
  • Special wiring and dedicated controllers are equipped with electric signals and contacts for immediate and easy interface.
  • The ideal alternative to pneumatic drivers, they feature a long life maintenance free electric motor with a unique electronic control system for high accuracy throughout a wide torque range.
KOL-KBL-15 Kolver Brushless CA Screwdriver
Kolver KBL-15 Brushless CA Screwdriver

  • The Brushless CA screwdrivers are designed for automated and fixtured applications. Special wiring and dedicated controllers are equipped with electric signals and contacts for immediate and easy interface.
  • The ideal alternative to pneumatic drivers, they feature a long life maintenance free electric motor with a unique electronic control system for high accuracy throughout a wide torque range
KOL-KBL-30 Kolver Brushless CA Screwdriver
Kolver KBL-30 Brushless CA Screwdriver

  • The Brushless CA screwdrivers are designed for automated and fixtured applications. Special wiring and dedicated controllers are equipped with electric signals and contacts for immediate and easy interface.
  • The ideal alternative to pneumatic drivers, they feature a long life maintenance free electric motor with a unique electronic control system for high accuracy throughout a wide torque range.
KOL-EDU-1BL Kolver Controller
Kolver EDU-1BL Controller

  • All Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller. The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached. The EDU1BL and EDU1FR control units for KBL screwdrivers feature a maintenance free state-of-the-art electronics with no wearing components.
  • The EDU1BL/SG and EDU1FR/SG controllers additionally feature slow start (0-2 sec), adjustable speed (60% to 100%) and visual indicators (green-yellow-red) for power on/off, torque reached or not reached.
  • All KBL screwdrivers work in combination with our EDU1FR, or EDU1FR/SG Controller. These controllers feature maintenance free state-of-the-art electronics, no wearing components, and protection against current overload up to 10A. The SG model features 4 Input and 3 Output connections, to identify motor start, motor stop, and reverse input. 24V DC Output identifies lever start, and torque reached signals.